Thank you!

Hello from Sydney Australia

Sorry my reply is in english

Nickname : Jay
Age : 36 
Location : Sydney, Australia
Hobby : Family, 90's arcade gaming, emulation, general tinkering with things
Job : IT service management
My favorite mame games : Street Fighter series, Time Crisis Series, Point Blank Series, Daytona USA, puzzle bobble, metal slug and a number of other 90's arcade classics
Favorite drink : Usually CC & Dry or Coffee Patron
Favorite dish: Vietnamese Pho

I'm not sure what the last question is, but looking at the replies from the translation, it's got to do with cabinets..

I have 2x Astro Cities (Yoko and Tate)

https://www.instagram.com/p/BmLOCjAF341/?taken-by=things.geek

2x Chinese Vewlix (aka Chewlix)

https://www.instagram.com/p/BeF6bbNFNjF/?taken-by=things.geek

A time crisis 1 cab that I re-purposed for a PS2 with original namco guns and custom gun driver to give me the whole Namco library

https://www.instagram.com/p/BnRCdKbFJOQ/?taken-by=things.geek

And finally, the reason why I'm here, I picked up a project sega rally cabinet with only the frame, tube, model 2 steering, gear shift and pedals. I'm currently working on converting it and getting the L2M2 board working correctly.

https://www.instagram.com/p/BnxVG2AFUtH/?taken-by=things.geek

Ok. So I'm reporting back!

I know this tech is really old and outdated, but I just got my hands on it and a racing cab and I was wondering if there are others that have come across my issues/behaviour

I have a squeaking on when I turn the wheel to a complete stop on the ccw side. Changes to the RV4 didn't take the squeak out, I have a feeling I'm going to have to adjust the belt?

I also made the changes listed in the byoac thread and also increased the ffb in profiler to 150% for global ffb settings, made sure centering is checked and it's so much better.

Here it is in the profiler..

https://youtu.be/4DyLOGVDhDk

And here it is in game (of course it's daytona )

https://youtu.be/lZ8ADfYKSRY

I think I'm pretty close to completing the wheel mod, just have to get the pedals working so I can actually sit down on the thing!

I'm wondering if this the same type of behaviour that's expected from the L2M2? Is the wheel supposed to stay engaged when turned to absolute right or left? Or should it re centre?

Any help would be greatly appreciated!

Thanks.

Ps my ini file for m2 emulator is as below

Citation
;FORCE EFFECTS PARAMETERS
;FE_CENTERING Effect (Spring centering effect)
FE_CENTERING_Gain=1.0      ;Global gain FE_CENTERING_Coefficient=10000   ;0-10000
FE_CENTERING_Saturation=10000   ;0-10000
FE_CENTERING_Deadband=100   ;1%

;FE_CLUTCH Effect (Friction, wheel turn hardness)
FE_CLUTCH_Gain=1.0      ;Global gain
FE_CLUTCH_Coefficient=10000   ;0-10000

;FE_LEFT,FE_RIGHT (Constant force in a direction)
FE_LEFT_Gain=2.0      ;Global gain
FE_LEFT_Magnitude=10000      ;0-10000
FE_RIGHT_Gain=2.0      ;Global gain
FE_RIGHT_Magnitude=10000   ;0-10000

;FE_UNCENTERING (Sine force, wave the wheel, rumble)
FE_UNCENTERING_Gain=10.0      ;Global gain
FE_UNCENTERING_Magnitude=10000   ;0-10000
FE_UNCENTERING_Offset=-200
FE_UNCENTERING_Phase=0
FE_UNCENTERING_Period=56000

Edit: bandicoot helped me out and said I needed to swap around my cw and CCW wires. Everything is now working as if should!

https://youtu.be/mcq3nvgrxD0

Citation de: aganyte le Jeudi 11 Octobre 2018, 07:31:22 AM
L2M2 is an old hack. You can try Pwm2m2 if you have anytime 

Yeah understand L2M2 is very old and outdated. I may look into the new version at some point, but I'm a total newbie and we were lucky enough to have L2M2's made by someone in Australia. The PWM2M2 seems A LOT more daunting than the L2M2

Hi everyone,

Sorry, I'm reading this thread via google translation and I can only speak English.

I am sorry to bring up an old thread, but I would like to thank aganyte and the rest of the people on this thread. I'm still reading the thread (about page 30).

I'm in the process of doing my own build as can be found on here:

https://www.aussiearcade.com/showthread.php/95819-Sega-Rally-pc-conversion

Again, I'd like to thank aganyte  for providing the schematic of the pcb to allow my conversion to happen!

I haven't completed yet, but hopefully I have something working very soon.

In French via google translation

Citation

Salut à tous,

Désolé, je lis ce fil via Google traduction et je ne parle que l'anglais.

Je suis désolé d'avoir évoqué un ancien fil de discussion, mais j'aimerais remercier aganyte et le reste des personnes qui y ont participé. Je lis toujours le fil (à la page 30).

Je suis en train de faire ma propre construction comme on peut le trouver ici:

https://www.aussiearcade.com/showthread.php/95819-Sega-Rally-pc-conversion

Encore une fois, je voudrais remercier aganyte d'avoir fourni le schéma de la carte permettant à ma conversion de se produire!

Je n'ai pas encore terminé, mais j'espère que quelque chose fonctionnera très bientôt.