Gamoover

[move]Vous aimez le couscous-boulettes, le chorizo, la Force 4, et la mimolette ? Alors soyez les bienvenus sur Gamoover ! [/move]

Menu

Voir les contributions

Cette section vous permet de consulter les contributions (messages, sujets et fichiers joints) d'un utilisateur. Vous ne pourrez voir que les contributions des zones auxquelles vous avez accès.

Voir les contributions Menu

Messages - perjmolsen

#81
Alimentation, Electricité / Sega G-loc deluxe motor power supply
Mercredi 04 Janvier 2017, 14:55:19 PM
Citation de: Vieille_Loutre le Mardi 03 Janvier 2017, 19:40:06 PM
Hi,

don't give up, gc339 has done a fantastic work, thanks to him i was able to repair my pcb.

if i can give you a advice, don't forget to replace your olds 78L15 and 78L05. These little bastards are voltage regulators and i think they were the cause of massive damage on my board...  :-\

good luck !

Hi

Thanks for the info - I will also order those then and change them just to be sure.
I refuse to give up, and not after that i found the guide from GC339 I hope that i am able to get the one power supply fixed.

Kind regards
Per
#82
Hi

Thanks - Ill order some of them :) that shoud be the last compnents that needs replacments
(with my basic skills to identify them)

Then i hope that i have found and replaced all the defective components, so when i turn on the power nothing blows up
#83
Resistor:


Location:


Components that i have changed:
Transistor:
4xS20LC20u
4XK1250
4XS20LC40

Transistors on pcb (location)
q40
Q9
Q8
Q6
Q11

PC1

IC2

WAITING FOR
TR1
IC1
R24


PCB with changed components


PCB other side

#84
Hi

Fist of all sorry that i write in english in a french forum, but it is the only forum that i have found where there is a person who might be able to help me with my Sega Gloc power supply.

I have read this tread http://www.gamoover.net/Forums/index.php?topic=28660.0  abaut restoring a PSU for a sega gloc deluxe - and first of all I am impressed!!!

I hope that "GC339" is readin my post because i would like to ask for his help :) (if possible)

So now to my question - I have also a defective PSU and i have changed some components, but there is a resistor that i am unable to find on ebay.

Its abaut 2 cm long and has legs almost 1mm - The color codes are Red-Red-Gold-Gold
If i type the color codes into a resistor calculator i get 2.2 Ohms 5%

But all the resistors that i have found physically smaller in size.
I do not know the voltage of the resistor, i assume that it sets the size of the resistor?

I have attached a photo of the resistor that I need - then i hope that you can help me identify it.
Also attached a picture of the place where the resistor is located.

And last i with that i where just as smart as "GC339" or that i lived in france and not i denmark